Circuit Breaker>>Earthlake Circuit Breaker>>DZL6 & DZL6N RCD/RCCB
DZL6 Residual Current Device
1.Application
Residual Current Device(RCD) FIN is in conformity with the standard of IEC61008. It can cut offthe fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it issuitable to avoid the shock hazard and fire caused by earth leakage. FIN ELCB is mainly suitable forvarieties of plants and enterprises, buildings, construction, commerce, hotels and families. It can beused in circuits of 1 phase 230V and 3 phase 400V 50/60Hz.
2.Main Technical Parameter
Number of Poles |
2P, 4P |
---|---|
Rated Current (A) |
16, 20, 25, 32, 40, 50, 63 |
Rated Residual Operating Current (I∆n)(mA) |
30, 100, 300, 500 |
Rated Residual Non-operation Current (I∆no)(mA) |
≤0.5I∆n |
Rated Voltage (V) |
AC 230/400 |
Residual Current Off-time |
≤0.1S |
Short Circuit Capacity (Icu) |
3000A |
Endurance |
≥4000 |
Protection Degree |
IP20 |
DZL6N Residual Current Circuit Breaker
1.Application
DZL6N residual current circuit breaker is in conformity with the standards of IEC61008. It cancut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. It can beused in circuits up to single phase 240V,threephase 415V, 50 or 60Hz.
2.Main Technical Parameter
Type |
DZL6N |
---|---|
Number of poles |
2P, 4P |
Rated current In(A) |
10, 16, 20, 25,32, 40, 50, 63 |
Rated residual operating current I∆n(mA) |
30,100,300 |
Rated residual non-operating current I∆no(mA) |
0.5I∆n |
Voltage Un(V) |
240(220)/415(380) |
Residual current off-time |
<0.1s |
Ultimate short circuit current Inc (A) |
3000A |