Tester>>Multimeter
MULTI TESTER 3008
for maintenance service
Designed for maintenance of high power lines
Drop-proof
High-power fuse protects up to 50,000 A
Supply current limiting resistance of 10-ohm restricts short circuit current
 |
Function |
Range |
Accuracy |
DC voltage |
6/30/60/300/600V (20 kΩ/V) |
±2.5 % f.s. |
|
AC voltage |
6/30/150/300/600 V (10 kΩ/V) |
±2.5 % f.s. , Average rectifier effective value |
|
Resistance test |
0 to 10 kΩ ( center scale 100 Ω), R × 1, R × 10, R × 100 |
±3 % of scale length |
|
Safety considera-tions |
Protection: 1 A rated, guaranteed current 50,000 A High-power fuse and 10 ohm resistor for restricting short circuit current |
||
Power supply |
R6P(AA) × 2 batteries |
||
Dimensions, mass |
94 mm(3.70 in)W × 134 mm(5.28 in)H × 56 mm(2.20 in)D, 350 g (12.3 oz) |
||
Accessories |
test leads, fuse, carrying case |
||
MULTI TESTER 3030-10
Basic tester with improved safety features
Drop proof design withstands dropping onto a concrete floor from a height of 1 meter
LED check, Battery check function
Temperature measurement support (with optional probes)
Protected against transient voltages up to 250 V AC, preventing electric shock accidents before they can happen
 |
Function |
Range |
Accuracy |
DC voltage |
0.3 V (16.7 kΩ/V), 3/12/30/120/300/600 V (20 kΩ/V) |
±2.5 % f.s. Max. rated voltage: 600 V |
|
AC voltage |
12/
30/120/300/600 V (9 kΩ/V) |
±2.5 % f.s. Average rectifier effective value Max. rated voltage: 600 V |
|
DC current |
60 µA/30 m/300 mA (300 mV internal voltage drop) |
±3 % f.s. |
|
Resistance range |
0 to 3 kΩ (center scale 30 Ω), R × 1, R × 10, R × 100, R × 1 k |
±3 % of scale length |
|
| Battery check | 0.9 to 1.8 V, load resistance 10 Ω |
±6 % f.s. |
|
| Temperature scale | -20 to 150°C |
±3 % of scale length |
|
Power supply |
R6P (AA) × 2 batteries |
||
Dimensions, mass |
95 mm(3.74 in)W × 141 mm(5.55 in)H × 39 mm(1.54 in)D, 280 g (9.9 oz) |
||
Accessories |
carrying case, spare fuse, test leads |
||
DIGITAL MULTI TESTER 3803
Compact and basic type DMM
Built-in with a 600V, 10kA interrupting capacity fuse
Basic accuracy ±0.6%
 |
Function |
Range |
Accuracy |
DC voltage |
399.9mV to 1000V, 5ranges |
±0.6% rdg. ±2 dgt. |
|
|
AC voltage (40 to 500Hz) |
399.9mV to 1000V, 5ranges |
±2% rdg. ±2dgt. (Average rectified) |
|
Resistance |
399.9Ω to 39.99MΩ, 6ranges |
±0.6% rdg. ±3 dgt. |
|
DC Current |
399.9μA to 10.00A, 5ranges |
±1.5% rdg. ±2 dgt. |
|
AC Current 40 to 500Hz |
399.9μA to 10.00A, 5ranges |
±2% rdg. ±2dgt. (Average rectified) |
|
Continuity |
Buzzer sounds at a resistance 34.5Ω or less |
||
Diode check |
Testing voltage: 3V or less, Testing current: 1.65mA |
||
Other functions |
Data hold, Auto-power save, RS-232C / USB communication |
||
Display |
Digital LCD, max. 3999 dgt. |
||
Sampling rate |
1.3 times/sec |
||
Power supply |
6F22 manganese battery × 1, Continuous use: 200 hours
|
||
Dimensions, mass |
83mm (3.27in) W × 178mm (7.01in) H × 58mm (2.28in) D, 400g (14.1oz) (with holster and battery) |
||
Accessories |
test lead, holster, 6F22 manganese battery |
||
DIGITAL MULTI TESTER 3805
Demonstrate the Power of your DMM during Facilities Maintenance
For Instrumentation (4 - 20mA% display)
For Power line distortion check (Harmonic distortion % display)
True RMS rectification of your harmonic-ridden signal, Basic accuracy ±0.09%
For cooling equipment maintenance (Simultaneous 2-point temperature measurement)
New ! Temperature scanning function (T1, T2, T1 - T2)
New ! PC communication via USB or RS-232C (using optional accessories)
 |
Function |
Range |
Accuracy |
DC voltage |
999.9mV to 999.9V, 4 ranges |
±0.09% rdg. ±2 dgt. |
|
AC Voltage (40 to 2000Hz) |
999.9mV to 999.9V, 4 ranges |
±1% rdg. ±5dgt. (true RMS rectified, crest factor 3 or less) |
|
Resistance |
999.9Ω to 99.99MΩ, 6 ranges |
±0.3% rdg. ±3dgt. |
|
| DC Current | 999.9μA to 9.99A, 5 ranges |
±0.1% rdg. ±3dgt. |
|
| AC Current 40 to 500Hz | 999.9μA to 9.99A, 5 ranges |
±1% rdg. ±5dgt. (true RMS rectified, crest factor 3 or less) |
|
Frequency (Input level: 0.5V to 1000V,minimum frequency 0.5Hz) |
9.999Hz to 999.9kHz |
±0.03% rdg. ±3dgt. |
|
| Capacitance | 9.999μF (resolution 1nF) to 9.999mF (resolution 1μF), 4 ranges |
±2% rdg. ±5dgt. |
|
| Temperature | [K] -40°C to 1372°C, [J] -40°C to 1200°C |
±0.3% rdg. ±3°C |
|
| Contact check | Buzzer sounds at a resistance equivalent to or less than 100 counts for each range |
||
| Diode check | Open-terminal voltage: less than 3.5V, Measurement current 0.46mA |
||
| Other functions | Recording value of maximum, minimum, averaging, Trigger-hold, Refresh-hold, Harmonic %, 4-20mA % , Relative value, Auto-power save, RS-232C/USB communication |
||
| Display | Digital LCD, max. 9999 dgt. |
||
| Sampling rate | 7 times/s, 4 times/s (at capacitance measurement up to 100 μF), 1 time/s (at frequency measurement range) |
||
Power supply |
6F22 manganese battery × 1, Continuous use: 30 hours
|
||
Dimensions, mass |
83mm (3.27 in) W × 178mm (7.01 in) H × 58mm (2.28 in) D, 400g (14.1 oz) (with holster and battery) |
||
Accessories |
test lead, holster, 6F22 manganese battery |
||
DIGITAL MULTI TESTER 3255
Tough for use on industrial power lines
420mV to 1000V AC/DC
10 to 1000A AC
Wide range, maximum reading 4199 digit
Measure AC Load Current with Optional Clamp on Probes
Industrial grade test leads for enhanced safety
Dust-proof and water-proof construction (IP54)
Polarized terminal design prevents incorrect insertion of test leads
 |
Function |
Range |
Accuracy |
DC voltage |
420mV to 1000V, 5 ranges |
±0.5% rdg. ±4 dgt. |
|
AC Voltage (40 to 2000Hz) |
420mV to 100V, 5 ranges |
±1.1%rdg.±4dgt, Average rectifier effective value |
|
Resistance |
420.0 Ω to 42.00MΩ, 6 ranges |
± 0.7 %rdg. ±4 dgt. |
|
AC Current |
10.00A to 1000A, 7ranges with optional clamp |
±2.0%rdg.±4dgt. |
|
Continuity |
Buzzer at 45Ω ± 35Ω |
||
Diode check |
Yes (3.4 V/850 µA max. open terminal voltage) |
||
| Auto power save | Possible (Cancel possible) | ||
| Range switching | Auto or Manual | ||
Display |
Digital LCD, max. 4199 dgt. |
||
Sampling rate |
2.5 times/sec |
||
Power supply |
R03 or LR03 (AAA) × 2 dry batteries (Continuous use 500 hours with LR03) |
||
| Safety considerations | Safety - EN61010 CAT III 600V, CAT II 1000 V, EMC - EN61326, Dust-proof and water-proof structure - EN60529 IP54 | ||
Dimensions, mass |
70 mm(2.76 in)W × 145 mm(5.71 in)H × 31 mm(1.22 in)D, 200 g (7.1 oz) |
||
Accessories |
test lead, carrying case |
||